33 found, showing page 1 of 3
Dremel 408 Sanding Band, 1/2 in Dia Drum, 1/8 in Dia Shank, 60 Grit, Coarse, Aluminum Oxide Abrasive
PRODUCT OVERVIEW
A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is available in extra fine (240 grit), fine (120 grit) or coarse (60 grit).
Product Details
Abrasive Material:Aluminum Oxide
Drum Diameter:1/2 in
Grit Grade:Coarse
Grit Size:60
Shank Diameter:1/8 in
Features
Removes rust from metal surfaces
Shapes rubber surfaces
View Details
$4.99
Dremel 409 Cut-Off Wheel, 15/16 in Dia, 0.025 in Thick, Emery Cloth Abrasive
PRODUCT OVERVIEW
This wheel for cutting metal with limited use on wood and plastic. Cut-off wheels make it easy-to-cut or slot bolts, screws, sheet metal, thin wood and plastic. The cut-off wheel cuts only along its edge. Do not attempt to sand or cut curved holes with them.
Product Details
Abrasive Material:Emery
Applicable Materials:Plastic Steel Thin Wood
Diameter:15/16 in
Includes:402 Mandrel
Speed Rating:30000 rpm
Suitable for:Rotary Tool and Hand Grinder
Thickness:0.025 in
Features
Mandrel fits all Diablo hole saws, from 5/8 to 6 in Dia
Cuts only along its edge
View Details
$13.99
Dremel 432 Series Sanding Band, 1/2 in Dia Drum, 1/8 in Dia Shank, 120 Grit, Coarse, Aluminum Oxide
PRODUCT OVERVIEW
A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is available in extra fine (240 grit), fine (120 grit) or coarse (60 grit).
Product Details
Abrasive Material:Aluminum Oxide
Drum Diameter:1/2 in
Grit Grade:Coarse
Grit Size:120
Shank Diameter:1/8 in
Features
Remove the eraser cap to replace lead
Sharp tips for easy driving
View Details
$4.99
Dremel 426 Cut-Off Wheel, 1-1/4 in Dia, 0.045 in Thick
PRODUCT OVERVIEW
The 426 cut-off wheel is reinforced with fiberglass for increased durability and used for cutting metal including hardened steel. Cut-off wheels make it easy-to-cut bolts or screws or make slots in rusted or stripped bolts and screws for removal with a screwdriver.
Product Details
Applicable Materials:Plastic Steel Thin Wood
Backing Material:Fiberglass
Diameter:1-1/4 in
Includes:402 Mandrel
Speed Rating:30000 rpm
Suitable for:Rotary Tool and Hand Grinder
Thickness:0.045 in
Features
Measurement scales are laser-engraved (in on front, mm on reverse) and are handy for sizing nuts, pipe and tube diameters
Cut bolts or screws or make slots in rusted or stripped bolts and screws
The extra hand finishing in these Pocket Worn(R) harvest orange bone knives makes them feel just right, right away
View Details
$15.99
Dremel 3100-1/15 Rotary Tool Kit, 1.2 A, 1/32 to 1/8 in Chuck, Keyed Chuck, 5000 to 35,000 rpm Speed
PRODUCT OVERVIEW
The Dremel 3100 is the result of upgrading our most popular rotary tool using user-requested features to improve the tool's design and ergonomics. The tool also features the EZ Twist nose cap with an integrated wrench that allows the nose cap to be used as a wrench to tighten accessories and eliminates the need for a separate wrench. A more efficient fan design and side vents provide a cooler running tool making it comfortable for extended periods of use. The tool also features a symmetrical design including a trumpet-shaped nose cap to facilitate a pencil-grip tool hold. The ability to use all existing Dremel rotary tool accessories and most attachments let the 3000 complete a wide range of applications including cutting, grinding, sanding, carving and polishing a variety of materials.
Product Details
Amp Rating:1.2 A
Chuck Size:1/32 to 1/8 in
Chuck Type:Keyed
Cord Length:6 ft
Includes:(1) Attachment (24) Dremel Accessories Accessory Case Plastic Case Rotary Tool
Speed Rating:5000 to 35000 rpm
Features
EZ Twist nose cap with wrench for fast accessory changes
Variable speed from 5000 to 35,000 rpm
Can be used with all Dremel rotary tool accessories and most attachments Cool-running ball bearing construction for smooth and quiet operation Replaceable motor brushes extend tool life
View Details
$67.99
Dremel 710-08 All Purpose Accessory Kit
PRODUCT OVERVIEW
The Dremel(R) 160-piece multi-purpose accessory set offers a breadth of high-quality accessories providing a complete kit to get you started with your Dremel(R) rotary tool. The kit includes the patented EZ Lock(TM) accessory system with the EZ Twist(TM) nose cap wrench, EZ Lock mandrel and EZ Lock cut-off wheels allowing for quick and easy accessory changes. The included storage case features reusable storage bins and lift-out trays for easy organization of the included bits. This kit is ready for cutting, grinding, polishing, sanding, cleaning and more.
Product Details
Blade Thickness:0.38 in
Includes:Sanding Band Sandpaper Disc Polishing Compound Felt Polishing Wheel Aluminum Oxide Grinding Stone Silicon Carbide Grinding Stone Mandrel Wire Brush Wrench and Reusable Carrying Case with Clear Lid
Speed Rating:35000 rpm
Features
Can stand upright or hang on a wall by hook
A complete start-up kit offering the breadth of accessories helpful for wide assortment of tasks
View Details
$52.99
Dremel Lite 7760-N/10 Rotary Tool, Battery Included, 4 V, 2 Ah, 1/8 in Chuck, Keyed Chuck, 8000 to 2
PRODUCT OVERVIEW
Designed for beginners in mind, the Dremel(R) Lite is a user-friendly solution for a wide range of projects. Making projects like sanding wood or engraving metal easy. The Lite is a handheld cordless rotary tool that features 8000 to 25,000 rpm of rechargeable battery powered by an efficient USB system that holds its charge. The four different speed settings offer better control for different applications, plus the lightweight design and soft grip make it easy and comfortable to use. The Lite is compatible with Dremel(R)'s entire line of rotary accessories, making it a must-have for busy homeowners and new DIYers.
Product Details
Battery Capacity:2 Ah
Battery Type:Lithium-Ion
Chuck Size:1/8 in
Chuck Type:Keyed
Control Type:Variable-Speed Trigger
Includes:(1) 2 Ah Battery and (1) Charger
Number Of Speeds:4
Speed Rating:8000 to 25000 rpm
Tool Only/ Battery Included:Battery Included
Voltage Rating:4 V
Features
Quick adjust dividers customize internal compartments to fit your needs Variable-speed trigger with 3000 spm provides increased blade control and fast cutting speed
Easy battery charging, the rechargeable 4 V lithium-ion battery and convenient USB charger ensures that it's ready whenever you are
Battery life indicator, LED light illuminates to notify you when the battery needs to be charged
Portable and lightweight, 360 deg soft-grip material allows for comfort and precise control
Compatible, can be used with most Dremel accessories and a selection of attachments
View Details
$67.99
Dremel 709-02 Rotary Tool Accessory Kit, Includes: (12) 409 15/16 in Thin-Cut Cut-Off Wheel
PRODUCT OVERVIEW
This 110-piece accessory kit provides the organized storage of popular Dremel(R) accessories to perform a wide range of applications. This accessory set offers reusable storage bins and lift-out trays for easy organization of the included bits for cutting, grinding, polishing, sanding, cleaning and more. The kit consists of regular and heavy-duty cut off wheels, sanding bands, sandpaper discs, polishing compound, felt polishing wheels, aluminum oxide grinding stones, silicone carbide grinding stones, dressing stone, mandrels, wrench and a reusable carrying case with clear lid.
Product Details
Grit Size:60 120 240
Includes:(12) 409 15/16 in Thin Cut Cut-Off Wheel (12) 420 15/16 in Cut-Off Wheel 426 1-1/4 in Fiberglass-Reinforced Cut-Off Wheel 540 1-1/4 in Cut-Off Wheel (4) 414 1/4 in Felt Polishing Wheel 421 Polishing Compound (4) 429 1 in Felt Polishing Wheel 952 Aluminum Oxide Grinding Stone 953 Aluminum Oxide Grinding Stone 83142 Silicon Carbide Grinding Stone 84922 Silicon Carbide Grinding Stone 407 1/2 in 60 Grit Sanding Band and Mandrel (6) 408 1/2 in 60 Grit Sanding Bands (6) 432 1/2 in 120 Grit Sanding Bands 430 1/4 in 60 Grit Sanding Band and Mandrel (5) 438 1/4 in 120 Grit Sanding Bands (4) 411 3/4 in 180 Grit Sanding Discs (13) 412 3/4 in 220 Grit Sanding Discs (13) 413 3/4 in 240 Grit Sanding Discs 191 High-Speed Cutter (2) 401 Mandrels 402 Screw Mandrel 415 Dressing Stone Wrench and Heavy-Duty Reusable Carrying Case
Speed Rating:30000 rpm
Features
Comes with reusable storage case and 110 accessories
Can stand upright or hang on a wall by hook
Clear lid, eight storage bins and removable trays make accessories easy-to-locate
Complete start-up kit for new Dremel rotary tool users
View Details
$27.99
Dremel 113 Engraving Cutter, 1/16 in Dia, 1-1/2 in L, 1/8 in Dia Shank, HSS
PRODUCT OVERVIEW
Use for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Do not run in excess of 30,000 rpm.
Product Details
Applicable Materials:Fiberglass Plastic Wood
Diameter:1/16 in
Length:1-1/2 in
Material:HSS
Shank Diameter:1/8 in
Speed Rating:30000 rpm
View Details
$7.99
Dremel 118 Cutter, 1/8 in Dia, 1-1/2 in L, 1/8 in Dia Shank, Steel
PRODUCT OVERVIEW
Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 rpm.
Product Details
Applicable Materials:Plastic Soft Metal Wood
Diameter:1/8 in
Length:1-1/2
Material:Steel
Shank Diameter:1/8 in
Speed Rating:30000 rpm
Suitable for:Dremel 4000 (4000-3/36) Dremel 200 Series (200-2/30) Dremel 4000 (4000-4/50) Dremel 3000 (3000-15) Dremel 3000 (3000-5) Dremel 3000 (3000-1/25 EZ) Dremel 3000 (3000-2/25) Dremel 3000 (3000-1/26) Dremel Stylo (2050-15) Dremel 8240 (8240-5) Dremel 4250 (4250-3/45) Dremel 8260 (8260-5/65) Dremel 8260 (8260-5) Dremel 8240 (8240-3/45) Dremel 8240 (8240-3/45) Dremel 8240 (8240 Platinum) Dremel 4250 (4250 Platinum ) and Dremel 8240 (8240-3) Multi-Tools
Features
Use for fastening pressure-treated lumber to concrete and steel
Great especially on curved surfaces
View Details
$8.99
Dremel 193 Cutter, 5/64 in Dia, 1-1/2 in L, 1/8 in Dia Shank, HSS
PRODUCT OVERVIEW
Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 rpm.
Product Details
Applicable Materials:Plastic Soft Metal Wood
Diameter:5/64 in
Length:1-1/2
Material:HSS
Shank Diameter:1/8 in
Speed Rating:30000 rpm
Suitable for:Dremel 4000 (4000-3/36) Dremel 200 Series (200-2/30) Dremel 4000 (4000-4/50) Dremel 3000 (3000-1/26) Dremel Stylo (2050-15) Dremel 8260 (8260-5) Dremel 4250 (4250-35A) Dremel 8240 (8240-5A) Dremel 4250 (4250-3/50) and Dremel 8250 (8250-5A) Diy Rotary Tools
Features
A versatile, high-quality cutter made of high-grade steel
View Details
$9.99
Dremel 199 Cutter, 3/8 in Dia, 1-1/2 in L, 1/8 in Dia Shank, HSS
PRODUCT OVERVIEW
Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 rpm.
Product Details
Applicable Materials:Plastic Soft Metal Wood
Diameter:3/8 in
Length:1-1/2 in
Material:HSS
Shank Diameter:1/8 in
Speed Rating:30000 rpm
Suitable for:Dremel 4000 (4000-3/36) Dremel 200 Series (200-2/30) Dremel 4000 (4000-4/50) Dremel 3000 (3000-15) Dremel 3000 (3000-5) Dremel 3000 (3000-1/25 EZ) Dremel 3000 (3000-2/25) Dremel 3000 (3000-1/26) Dremel Stylo (2050-15) Dremel 8240 (8240-5) Dremel 4250 (4250-3/45) Dremel 8260 (8260-5/65) Dremel 8260 (8260-5) Dremel 8240 (8240-3/45) Dremel 8240 (8240 Platinum) Dremel 4250 (4250 Platinum ) Dremel 8240 (8240-3) Dremel 8250 (8250 Platinum) Dremel 8250 (8250-5) and Dremel 3200 (3200 1/90) Diy Multi-Tools
Features
A versatile, high-quality cutter made of high-grade steel
View Details
$9.99
Dremel 932 Grinding Stone, 3/8 in Dia, 1/8 in Arbor/Shank
PRODUCT OVERVIEW
A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.
Product Details
Abrasive Material:Aluminum Oxide
Applicable Materials:Metal Stainless Steel
Arbor/ Shank Size:1/8 in
Color:Green
Diameter:3/8 in
Speed Rating:35000 rpm
Features
Specialty brushes can be used to clean threaded pipe and fittings
Use for deburring and roughing copper tubing, as well as plastic pipe
View Details
$5.99
Dremel 952 Grinding Stone, 3/8 in Dia, 1/8 in Arbor/Shank, Aluminum Oxide Abrasive
PRODUCT OVERVIEW
Turn your Dremel(R) rotary tool into a simple-to-use rotary grinder. Our 952 aluminum oxide grinding stone features a high-quality industrial abrasive that's ideal for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.
Product Details
Abrasive Material:Aluminum Oxide
Applicable Materials:Metal Stainless Steel
Arbor/ Shank Size:1/8 in
Color:Green
Diameter:3/8 in
Height:5.0 in
Speed Rating:35000 rpm
Features
Specialty brushes can be used to clean threaded pipe and fittings
View Details
$5.99
Dremel 290-02 Engraver Kit, 0.02 A, 7200 spm, Includes: (1) Carbide Tip and (1) Letter/Number Templa
PRODUCT OVERVIEW
Get an engraving kit that does it all. This unique kit lets you engrave or decorate a wide variety of materials, including metal, plastic, glass, ceramic, wood and leather. Each Dremel(R) engraver kit includes a tool with a soft-grip body and variable stroke control so you can etch both fine lines and deep grooves. Also included is a replaceable carbide engraving point. By providing you with options that a stand-alone leather, wood or metal engraving kit can't, Dremel(R) gives you more ways to personalize your valuables.
Product Details
Amp Rating:0.02 A
Cord Length:6 ft
Includes:(1) Carbide Tip and (1) Letter/Number Template
Strokes Per Minute:7200 spm
Features
Stroke adjustment dial regulates engraving depth from fine lines to deep grooves
Replaceable-grip and face
Letter/number template helps etch words and numbers
SoftGrip(R) handles for comfort and control
Light and compact design provides comfortable use for precision engraving performance
Decorate metal, glass and stone for an individual touch
View Details
$29.99
